Do You Know The Installation Requirements Of Hanger Bolt?

The technical requirements of Hanger Bolt mainly include material selection, pre-installation preparation, construction steps, and quality inspection after construction.

In terms of material selection, the material of Hanger Bolt should have sufficient strength and corrosion resistance to withstand long-term loads and environmental impacts. The hanger and bolt materials should have sufficient strength to withstand the weight of the building and external loads. The material should have good corrosion resistance to prevent structural damage caused by corrosion.

Check the material's qualification certificate and related quality documents to ensure that they meet national and industry standards.

Before construction, preparation work is required. Measurement and marking: Accurately measure the installation location of the Hanger Bolt and mark it. Environmental inspection: Check the environmental conditions of the construction site to ensure that there are no obstacles interfering with the installation process. Familiar with drawings and technical requirements: Construction personnel should be familiar with the construction drawings and technical requirements to ensure accurate understanding of the installation details of the hanger bolts.

The specific construction steps of Hanger Bolt are drilling: Use a suitable drill bit to drill according to the marked position to ensure that the depth and diameter of the drilled hole meet the design requirements. Clean the hole: After drilling, clean the debris and dust in the hole to ensure the cleanliness of the installation surface. Install the hanger bolt: Insert the hanger bolt into the hole and use a special fastening tool to fix it to ensure that the Hanger Bolt is installed vertically without tilting or shaking. Check and adjust: After installation, check the hanger bolt to ensure that it is firm and without shaking. If necessary, use tools such as wrenches to make fine adjustments.

After the construction is completed, a comprehensive quality inspection should be carried out, including position accuracy: Check whether the installation position of the Hanger Bolt is accurate and meets the design requirements. Tightness: Check the tightness of the Hanger Bolt to ensure that it is stable and not loose. Record: Record the entire installation process for subsequent maintenance and repair.

Understanding the installation steps and requirements of the Hanger Bolt is conducive to the smooth and safe construction.